Bmc Bi-Level St System

Product Description:

• G3 B30VT is a bi-level device with S/T mode and target tidal volume function for patients with respiratory insufficiency.
• With effective performance and intelligent comfort features, they are very widely used.

Features:

S/T Mode

• The device follows the patient's spontaneous breathing. However, if there is no inhalation for a certain period of time, the device will giveforced ventilation to ensure the minimum ventilation volume.

Target Tidal Volume Function

• According to the patient's need, G3 can set the Target Tidal Volume and the device will automatically adjust the pressure support level to reach the preset tidal volume, so as to ensure a better ventilation effect. According to the patient's need, G3 can set the Target Tidal Volume and the device will automatically adjust the pressure support level to reach the preset tidal volume, so as to ensure a better ventilation effect.

Auto Leak Compensation

• The device detects the air leakage during treatment in real-time and adjusts the baseline to ensure correct triggering and related functions.

Inspiratory time control

• Ti min and Ti max could be set independently, avoiding insufficient ventilation due to short inspiratory time. In the meantime, cases can be prevented where expiratory sensitivity is unable to meet due to a large leak.

Different work modes of the BMC G3 B30VT

• A BiPAP (BiLevel) machine provides you breathing support on two levels: during inspiration and during expiration. The BMC G3 B30VT has 4 work modes: S, T, S/T and CPAP.
• S:This mode responds to inhalation and exhalation. The pressure increases when you start to inhale and decreases when you start to exhale.
• T:In T mode, the G3 B30VT automatically starts inhalation and exhalation. The time of inhalation and exhalation is automatically controlled by the device, according to the preset parameter.
• S/T:The device responds to your inhalation and exhalation. It increases the pressure when you inhale and decreases the pressure when you exhale. If you don’t start inhaling within a certain amount of time, the G3 B30VT automatically starts the inhalation process. When the device starts the inhalation process, it controls the inhalation time and automatically decreases the exhalation pressure within the preset time.
• CPAP:In this work mode, the machine blows air into your airways at a fixed pressure.

How to use:

1. Connect one end of the tube to assembled mask
2. connect one end of the tube to the outletof the device(connect the heated tubing joint to the air outlet of the device andthen insert the power plug into the heated tubing port on the back of the device).
3. Connect the power adapter to the DC inlet of the main device.
4. Connect the power cord to the power adapter.
5. Plug the power cord into the power outlet.
6. Turn on the device from the on/off bottom

Please return the user manual for more information.

Ingredients:

Included in Box

• G3 B30VT

• Power Adapter

• Power Cord

• 2 Washable Air Filters

• User Manual

• Carry Case

• SD Card

• Heated Tubing